Need help?Do you have a question about the EnGenius EOC2611P and is the answer not in the manual?
General| Modulation | 16-QAM, 64-QAM, CCK, DQPSK, QPSK |
|---|---|
| Frequency band | 2.412 - 2.472 GHz |
| Channels quantity | 11 channels |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Maximum data transfer rate | 108 Mbit/s |
| Quality of Service (QoS) support | Yes |
| Outdoor range | 1 - 30km |
| Networking features | Fast Ethernet |
| Wireless technology | 802.11b/g |
| Maximum operating distance | 30000 m |
| Compliance industry standards | 802.3, 802.3u, 802.11b/g |
| Supported data transfer rates | 108, 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 Mbit/s |
| Antenna connector type | RP-SMA |
| Antenna gain level (max) | 10 dBi |
| Internal | No |
| Certification | FCC Part 15C/15B, EN 300 328/EN 301 489-1/-17, EN60950 |
| Ethernet LAN (RJ-45) ports | 1 |
| Security algorithms | 802.1x RADIUS, SSID, WEP, WPA, WPA2 |
| Storage temperature (T-T) | -30 - 80 °C |
| Operating temperature (T-T) | -20 - 70 °C |
| Power requirements | 24V/ 0.6A DC |
| Flash memory | 8 MB |
| Internal memory | 32 MB |
| Processor model | Qualcomm Atheros AR2316 |
Weight and Dimensions| Weight | 380 g |
|---|---|
| Dimensions (WxDxH) | 84 x 260 x 55 mm |
Step-by-step instructions for installing the hardware.
Guides on configuring the PC's TCP/IP settings to access the device.
Instructions on how to log into the device's web interface.
Configure device name, country, and operating mode.
Configure static IP address or DHCP client settings.
Configure wireless mode, channel, SSID, and security.
User and password management for device access.
Save, load, or reset device configurations.
Process for updating the device's firmware.
Instructions for accessing the Client Bridge mode GUI.
Configure device name, country, and operating mode for Client Bridge.
Configure IP settings for Client Bridge mode.
Configure wireless mode, channel, and SSID for Client Bridge.
Configure wireless security settings for Client Bridge mode.
User administration for Client Bridge mode.
Backup, restore, and reset options for Client Bridge mode.
Firmware upgrade process for Client Bridge mode.
Instructions for accessing the WDS Bridge mode GUI.
Displays the status of WDS links.
Configure device name, country, and operating mode for WDS Bridge.
Configure IP settings for WDS Bridge mode.
Configure wireless mode, channel, and SSID for WDS Bridge.
Configure WDS links for WDS Bridge mode.
Configure WDS security settings.
User administration for WDS Bridge mode.
Backup, restore, and reset options for WDS Bridge mode.
Firmware upgrade process for WDS Bridge mode.
Instructions for accessing the Client Router mode GUI.
Configure device name, country, and operating mode for Client Router.
Configure WAN connection type (DHCP, Static IP, PPPoE, PPTP).
To Next Page
