How to reset EnGenius Wireless Access Point ENH200?
You can reset the EnGenius ENH200 Wireless Access Point to its factory default configuration using either a hardware or software method. For the hardware method, open the cover on the bottom panel and press the Reset button for about 10 seconds. For the software method, click 'Restore to Factory Default' in the Management menu.
What kind of PoE should I use for EnGenius Wireless Access Point ENH200?
The EnGenius ENH200 Wireless Access Point uses a proprietary PoE injector and will not work with standard 802.3af compliant PoE switches.
Why I don't see traffic pass after connecting EnGenius Wireless Access Point ENH200 to PoE switch?
The EnGenius ENH200 Wireless Access Point uses a proprietary PoE injector and will not work with standard 802.3af compliant PoE switches.
I plugged PoE to the second Ethernet port on EnGenius Wireless Access Point ENH200, but the unit is not on, how come?
You need to plug the Ethernet cable connected to the PoE injector into the main LAN port on the EnGenius Wireless Access Point ENH200. The secondary Ethernet port is an additional LAN port for a regular Ethernet connection, such as an IP camera.
General| Modulation | CCK, DBQSK, DQPSK, QPSK |
|---|---|
| Frequency band | 2.412 - 2.472 GHz |
| Channels quantity | 11 channels |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Maximum data transfer rate | 54 Mbit/s |
| Quality of Service (QoS) support | Yes |
| Networking features | Fast Ethernet |
| Wireless technology | 802.11 b/g/n |
| Compliance industry standards | IEEE802.3, 802.3U, 802.11 b/g/n |
| Supported data transfer rates | 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 Mbit/s |
| Antenna gain level (max) | 10 dBi |
| Internal | No |
| Certification | FCC, CE, IC |
| Ethernet LAN (RJ-45) ports | 2 |
| Security algorithms | 802.1x RADIUS, SSID, WEP, WPA, WPA2 |
| Storage temperature (T-T) | -30 - 80 °C |
| Operating temperature (T-T) | -20 - 70 °C |
| Operating relative humidity (H-H) | 0 - 90 % |
| Power requirements | 24VAC/ 0.6A |
| Flash memory | 8 MB |
| Internal memory | 32 MB |
| Processor model | Qualcomm Atheros AR7240 |
Weight and Dimensions| Weight | 408 g |
|---|---|
| Dimensions (WxDxH) | 84 x 260 x 55 mm |
Describes the intended audience for the user manual.
Explains the symbols and formatting conventions used in the document.
Lists generic icons that appear in the manual's figures.
Details the key features and capabilities of the ENH200.
Outlines the advantages of using WLANs over wired network solutions.
Lists all items included in the product packaging.
Specifies the necessary hardware and software for installation.
Describes the components found on the bottom panel of the ENH200.
Details the LED indicators present on the back panel of the ENH200.
Provides guidance on selecting optimal locations for device installation.
Offers step-by-step instructions for the physical installation of the ENH200.
Explains the meaning and status indicated by the ENH200's various LEDs.
Guides users on configuring TCP/IP settings for Windows 7.
Provides instructions for TCP/IP configuration on Windows Vista.
Details the TCP/IP configuration process for Windows XP.
Explains how to configure TCP/IP settings for Windows 2000.
Guides users through TCP/IP configuration on a Macintosh operating system.
Explains the procedure for accessing the device's web-based configuration interface.
Offers recommendations for enhancing device security and management efficiency.
Describes how to save current settings or revert to previous configurations.
Displays current system information, LAN settings, and wireless status.
Lists currently associated wireless clients and their signal strength.
Allows viewing of system event logs for monitoring and troubleshooting.
Shows detailed information about the current network and wireless connection status.
Displays a list of clients that have received IP addresses through DHCP.
Explains how to switch the ENH200 between its various operating modes.
Covers basic configuration parameters related to wireless operation.
Details the configuration steps for operating the ENH200 as an Access Point.
Describes the settings for individual SSIDs, including security and VLAN configuration.
Provides instructions for configuring the ENH200 to function as a Client Bridge.
Explains how to scan for and select nearby wireless Access Points for connection.
Details the configuration process for establishing Wireless Distribution System (WDS) links.
Guides users on configuring the ENH200 to operate as a Client Router.
Introduces the section dedicated to configuring wireless security protocols.
Explains the configuration steps and options for WEP encryption.
Details the configuration settings for WPA-PSK wireless security.
Details the configuration settings for WPA2-PSK wireless security.
Details the configuration settings for WPA-PSK Mixed wireless security.
Details the configuration settings for WPA wireless security.
Details the configuration settings for WPA2 wireless security.
Details the configuration settings for WPA Mixed wireless security.
Covers advanced wireless parameters such as data rate and transmit power.
Explains how to configure MAC address filtering for network access control.
Details the configuration of WDS links for network expansion.
Configures the Local Area Network (LAN) IP address settings for the ENH200.
Configures Spanning Tree Protocol settings to prevent network loops.
Covers Wide Area Network (WAN) connection types and their configurations.
Details the steps for configuring a Static IP connection for the WAN interface.
Explains the process of configuring a DHCP connection for the WAN interface.
Describes the configuration for a PPPoE WAN connection, typically for DSL.
Details the configuration for a PPTP WAN connection.
Configures LAN settings specifically when the device is operating in Router Mode.
Configures the device to allow VPN traffic to pass through the network.
Sets up rules to forward incoming network traffic to specific internal devices.
Configures the Demilitarized Zone (DMZ) for unrestricted Internet access to a specific device.
Manages administrator credentials and remote access settings for the device.
Configures Virtual LAN (VLAN) settings for network management purposes.
Configures Simple Network Management Protocol (SNMP) for network device monitoring.
Manages device configuration backup, restore, and factory reset options.
Guides users through the process of updating the device's firmware.
Configures the device's internal clock and enables synchronization with NTP servers.
Configures logging parameters for system events and errors.
Provides tools for testing network connectivity and diagnosing issues.
Provides step-by-step instructions for configuring the ENH200 in Access Point mode.
Outlines the configuration steps for a wireless client device to connect to the network.
Provides step-by-step instructions for configuring the ENH200 as a Client Bridge.
Provides step-by-step instructions for configuring the ENH200 in WDS Bridge mode.
Provides step-by-step instructions for configuring the ENH200 in Client Router mode.
Explains how to build a wireless local area network using the ENH200 in Access Point mode.
Describes how to extend wireless network coverage using WDS with Access Point mode.
Explains how to build a wireless network using the ENH200 in Client Bridge mode.
Explains how to build a wireless network using the ENH200 in WDS Bridge mode.
Explains how to build a wireless network using the ENH200 in Client Router mode.
Discusses the use of RADIUS for centralized authentication and authorization.
Provides answers to common problems encountered with the ENH200.
Offers guidance on how to contact technical support for assistance.
Defines technical terms and acronyms used throughout the manual for clarity.
To Next Page
