EnGenius ENH200 - 1.3 Package Contents; 1.3 System Requirement

1.3 Package Contents
Openthepackagecarefullyandmakesureitcontainsalloftheitemslistedbelow.
‐ OneEnGeniusWirelessAccessPoint/ClientBridge(ENH200)
‐ One24V/0.6Apoweradapter
‐ OnePoEinjector(EPE‐24R)
‐ Onemaststrap
‐ Onequick‐installationguide
‐ OneCDcontainingtheusermanual

Ifanyitemismissingordamaged,contactyourplaceofpurchaseimmediately.

KeepallpackingmaterialsincaseyouneedtoreturntheENH200.TheENH200mustbereturned
withitsoriginalpackingmaterials.

 UseonlythepoweradaptersuppliedwithyourENH200.Usingadifferentpoweradapter
candamagetheENH200.
1.3 System Requirement
ToinstalltheENH200,youneedanEthernetcableandacomputerequippedwith:
‐ AnEthernetinterface
‐ Oneofthefollowingoperatingsystems:MicrosoftWindowsXP,Vista,or7;orLinux
‐ AnInternetbrowserthatsupportsHTTPandJavaScript
