Need help?Do you have a question about the EnGenius ENH1350EXT and is the answer not in the manual?
General| 2.4 GHz | Yes |
|---|---|
| MIMO type | Multi User MIMO |
| Modulation | 16-QAM, 64-QAM, 256-QAM, BPSK, CCK, QPSK |
| Number of VLAN IDs | 16 |
| Fit AP mode features | Wireless distribution system (WDS) |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Virtual LAN features | Tagged VLAN, SSID-based VLAN assignment |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Maximum data transfer rate | 1000 Mbit/s |
| Security algorithms | SNMP, SNMPv3 |
| Number of SSID supported | 64 |
| Service Set Identifier (SSID) features | SSID broadcast on/off |
| Internal | No |
| Placement | Wall |
| Certification | FCC, CE |
| Product color | White |
| International Protection (IP) code | IP67 |
| WAN connection | Ethernet (RJ-45) |
| USB 2.0 ports quantity | 0 |
| Ethernet LAN (RJ-45) ports | 1 |
| Antennas quantity | 4 |
| Antenna connector type | SMA |
| Antenna gain level (max) | 5 dBi |
| Power consumption (max) | 12.6 W |
| Storage temperature (T-T) | -40 - 80 °C |
| Operating temperature (T-T) | -20 - 60 °C |
| Operating relative humidity (H-H) | 0 - 90 % |
| Cables included | AC |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 173.6 mm |
|---|---|
| Width | 111.2 mm |
| Height | 30.29 mm |
| Weight | 295 g |
Details key features and introduction for ENH1750EXT.
Details key features and introduction for ENH1350EXT.
Provides detailed technical specifications for the ENH1750EXT.
Describes physical ports, indicators, and mounting features of the ENH1750EXT.
Step-by-step instructions for installing the ENH1750EXT hardware.
Details wall and pole mounting kits and components for ENH1750EXT.
Step-by-step instructions for installing the ENH1350EXT hardware.
Details wall and pole mounting kits and components for ENH1350EXT.
Covers default AP access details and the web configuration interface.
Explains the AP mode for central client connection and SSID support.
Describes using the AP as a central point for client bridges to expand networks.
Allows modification of the device's IPv4 and IPv6 IP settings.
Configures detailed wireless network parameters for 2.4GHz and 5GHz bands.
Configures security modes, including WEP, WPA2-PSK, and WPA2-Enterprise.
Provides options to logout and to reboot or reset the AP to default settings.
To Next Page