What to do if EnGenius ENH210 is not on after plugging in PoE?
If your EnGenius Wireless Access Point doesn't power on after connecting the PoE, ensure that the Ethernet cable is connected to the PoE injector. Also, verify that the power adapter included with the package is connected to the “DC IN” port on the PoE injector.
General| Model | ENH210 |
|---|---|
| Type | Wireless Access Point |
| Maximum Data Rate | 300 Mbps |
| Antennas | 2 |
| Ethernet Ports | 1 x 10/100 Mbps |
| Power over Ethernet (PoE) | 802.3af |
| Mounting Options | Wall, Ceiling |
| Wireless Standards | 802.11 b/g/n |
| Frequency Band | 2.4 GHz |
| Operating Mode | Access Point, Client Bridge |
| Power Supply | 12V DC |
| Security | WEP, WPA, WPA2 |
| Weight | 200 g |
Step-by-step procedure for physically mounting and connecting the ENH210 device.
Step-by-step guide to configure TCP/IP on Windows 7 for ENH210 setup.
Step-by-step guide to configure TCP/IP on Windows Vista for ENH210 setup.
Step-by-step guide to configure TCP/IP on Windows XP for ENH210 setup.
Guide to configure TCP/IP on Mac OS X for ENH210 setup.
Instructions on accessing ENH210's web configuration menu after TCP/IP setup.
Guides on changing ENH210's operating mode (AP, Client Bridge, WDS, Client Router).
Configures basic wireless network settings like mode, channel, and SSIDs for the ENH210.
Sets up wireless security protocols like WEP, WPA-PSK, WPA2-PSK, WPA, and WPA2.
Configures IP address, subnet mask, and gateway for ENH210's LAN interface.
Configures Wide Area Network connection types (Static IP, DHCP, PPPoE, PPTP) for Internet access.
Manages device access by setting up administrator usernames and passwords for security.
Provides instructions for upgrading ENH210's firmware to the latest version.
Step-by-step example configuration for setting up ENH210 in Access Point mode.
Practical example for configuring ENH210 to operate in Client Bridge mode.
Illustrates step-by-step configuration example for ENH210 in WDS Bridge Mode.
Provides common questions and answers for troubleshooting issues with the ENH210.
To Next Page