3 Installation
This chapter describes how to install the ENH210.
Only experienced installation professionals who are familiar with local building
and safety codes and, wherever applicable, are licensed by the appropriate government
regulatory authorities should install the ENH210.
3.1 Pre-installation Guidelines
Select the optimal locations for the equipment using the following guidelines:
- The ENH210 should be mounted on a 1"- 2" pole or wall. Its location should enable easy
access to the unit and its connectors for installation and testing.
- The higher the placement of the antennas, the better the achievable link quality.
- The antennas should be installed to provide a direct or near line of sight link with the base
station antenna.
To Next Page
Loading...
