What to do if EnGenius Wireless Access Point is not on after plugging in PoE?
If your EnGenius Wireless Access Point doesn't power on after connecting the PoE, ensure that the Ethernet cable is connected to the PoE injector. Also, verify that the power adapter included with the package is connected to the “DC IN” port on the PoE injector.
General| Product Type | Outdoor Wireless Access Point |
|---|---|
| PoE Support | 802.3af PoE |
| Ingress Protection Rating | IP55 |
| Wireless Standards | 802.11b/g/n |
| Frequency Band | 2.4 GHz |
| Maximum Data Rate | 300 Mbps (2.4 GHz) / 867 Mbps (5 GHz) |
| Ethernet Ports | 1 x 10/100Base-T Ethernet Port |
| Operating Modes | Access Point, WDS |
| Security Features | WPA/WPA2 |
| Mounting | Pole, Wall |
| Power Supply | 802.3af PoE |
| Antenna | 2 x 5 dBi dual-band external antennas |
Details the design and scope of the ENH210EXT's wireless capabilities and applications.
Details the step-by-step procedure for physically installing the device.
Step-by-step guide to setting up TCP/IP for Windows 7.
Step-by-step guide to setting up TCP/IP for Windows Vista.
Step-by-step guide to setting up TCP/IP for Windows XP.
Step-by-step guide to setting up TCP/IP for Mac OS X.
Instructions on accessing the device's web-based configuration menu.
Guides on changing the device's operational mode (AP, Client Bridge, etc.).
Covers WEP, WPA, WPA2, and mixed security modes for network protection.
Configures IP address, subnet mask, and gateway for the LAN interface.
Configures WAN connection methods like Static IP, DHCP, PPPoE, PPTP.
Manages user accounts, remote access, VLANs, and SNMP settings.
Addresses common questions and solutions for device issues.
Information on how to get help from technical support.
To Next Page
