7.4 Wireless MAC Filter
Wireless MAC Filter is used to Allow or Deny wireless clients, by their MAC addresses, from
accessing the network. You can manually add a MAC address to restrict the access
permission’s of the client. The default setting is Disable Wireless MAC Filters.
0.
ACL Mode ACL Mode can deny or allow specific clients to access the
network. Select Disable, Deny MAC in the list, or Allow MAC in
the list from the drop down list.
MAC Address Filter Specify the MAC address, manually.
Add Press Add to add the MAC address in the table.
Apply Press Apply to apply the changes.
To Next Page
Loading...
