EnGenius ENH210EXT - Package Contents; System Requirement; Hardware Overview

1.3 Package Contents
Open the package carefully, and make sure that none of the items listed below are missing.
Do not discard the packing materials; in case of return, the unit must be shipped in its original
packaging.
 1 x Wireless Access Point / Client Bridge (ENH210EXT)
 1 x 48V/380mA Power Adapter
 1 x PoE Injector (EPE-48GR)
 2 x 5dBi Omni Antenna
 1 x Mounting Kit with Mast-Mount Strap Special Screw Set
 1 x QIG
 1 x CD (User Manual)
Using a power adapter other than the one included with the ENH210EXT
may cause damage to the device.
1.4 System Requirement
The following conditions are the minimum system requirements.
 A computer with an Ethernet interface and operating under Windows XP, Vista, 7 or
Linux.
 An Internet browser that supports HTTP and JavaScript.
1.5 Hardware Overview
Physical Interface - 1 x 10/100/1000 LAN Port with PoE support
- 1 x 10/100/1000 LAN port
- 2 x N-type Connector
Maximum Wireless Data rate - 300 Mbps
LEDs status - Power Status
- LAN1 (10/100/1000Mbps)
- LAN2 (10/100/1000Mbps)
- WLAN (Wireless is enabled)
- 3 x Link Quality (Client Bridge mode)