when the delay-spread of the channel exceeds the guard interval
or if timing synchronization between the transmitter and receiver
is not precise.
Aggregation Aggregation is to merge the typical size of data’s header to one
data. It is useful for the small size but more packets.
Wireless Traffic
Shaping
Place a check to enable Wireless Traffic Shaping function.
Incoming Traffic Limit Specify the wireless transmission speed for incoming traffic.
Outgoing Traffic Limit Specify the wireless transmission speed for outgoing traffic.
Accept / Cancel Press Accept to confirm the changes or Cancel to return
previous settings.
Please make note of the following:
1. Accept does not apply the changes – you must go to Status -> Save / Load to apply
the new settings. Please refer to Chapter 4.1 for more information.
2. Changing Wireless Advanced Settings may lower the wireless connection quality.
Please keep all settings as default unless you understand the modifications which you
have made.
To Next Page
Loading...
