1.2 Benefits
Access Point Mode This is considered the main application the device is designed for.
Use this feature to setup the access point’s configuration
information. It supports transmit power and channel adjustments.
Clients can access the network with different regulatory settings
and automatically change to the local regulations.
Client Bridge Mode Use this feature to connect to an Access Point, enabling WAN
sharing.
WDS Mode Use this feature to link multiple APs in a network; All associated
clients from any AP can communicate with each other like in
ad-hoc mode.
Client Router Mode Clients connect wirelessly to an AP and transmit data through AP
to access the Internet.
Multiple SSIDs ENH210 supports up to 4 SSIDs on your access point. The
following options can be set to each SSID:
- Public or private SSID
- Authentication
- VLAN identifier
- RADIUS accounting identifier
- Profile isolation for infrastructure network
VLAN Specify a VLAN number for each SSID to separate the services
among clients.
QoS Use this feature to limit the incoming or outgoing throughput.
Wi-Fi Protected Access
Wi-Fi Protect Access is a standard-based interoperable security
enhancement that increases the level of data protection and
access control for existing and future wireless LAN systems. It is
compatible with IEEE 802.11i standard. WPA leverages TKIP and
802.1X for authenticated key management.
To Next Page
Loading...
