EnGenius ENH1350EXT - ENH1750 EXT Mounting Instructions

22
Mounting the ENH1750EXT
Using the provided hardware, the ENH1750EXT can be attached to a wall or a pole.
1. Wall Mount Kit 260x180x7 (mm)
2. Pole Mount Kit 140x112x33 (mm)
3. Pipe 63.5 (D) x 12.7 (mm) 4. Tool 20(D) x 6 (mm) 5. Screws: 6.5(D) x 9.95 (mm)