EnGenius EOC2611P - 7.3.1 System Properties

EnGenius EOC2611P Version 1.0
71

7.3 System 
 Underthe System sectionofthe left menu,you will see
the following options: System Properties setting, which
isdescribedbelow.



7.3.1 SystemProperties
 ThispageallowsyoutoswitchtheOperatingModeofthedevice,aswellasspecifyanameand
selecttheoperatingregion.



 DeviceName:Specifyanameforthedevice(thisisnottheSSID),
 Country/Region:Selectacountryfromthedrop‐downlist.
 OperatingMode:SelectanOperatingMode.Configurationforeachoperatingmodeisdescribed
intheirrespectivechapters.
 ClickontheApplybutton
tosavethechanges.
