EnGenius EOC2611P - 6.5.3 Backup;Restore settings, Reset to factory default settings

EnGenius EOC2611P Version 1.0
63
6.5.3 Backup/Restoresettings,Resettofactorydefaultsettings
 This optionisused to save thecurrent settings ofthedevice in a  fileon your local diskor load
settingsontothedevicefromalocaldisk.Thisfeatureisveryhandyforadministratorswhohave
severaldevicesthatneedtobeconfiguredwiththesamesettings.




 Saveacopyofthecurrentsettings:ClickontheBackupbuttontosavethecurrentconfiguration.
 Restoresavedsettingsfromafile:Onceafilehasbeenbackedup,youmayrestoreitbyclicking
ontheBrowsebuttontoselectthefile,andthenthe
Restorebutton.
 Revert to factory default settings: Click on the Factory Default Settings button to reset the
device to the default settings. Please wait while the device restart and then access the device
usingthedefaultIPaddress:192.168.1.1



