EnGenius EOC1650 - 4.5.8 Diagnostics

EnGenius EOC1650 Wireless Access Point / Client Bridge Version 2.0
27



 ManuallySetDateandTime:Specifythedateandtime
 AutomaticallyGetDateandTime:Selectthetimezonefromthedropdownlistandthenspecify
theIPaddressoftheNTPserver.
 ClickontheApplybuttontosavethechanges.


4.5.7 Log
 ClickontheLoglinkundertheManagementmenu.TheLogpagedisplaysalistofeventsthatare
triggered on the Ethernet and Wireless interface. This log can be referred when an unknown
error occurs on the system or when a report needs to be sent to the technical
 support
departmentfordebuggingpurposes.

 Syslog:Choosetoenableordisablethesystemlog.
 LogServerIPAddress:SpecifytheIPaddressoftheserverthatwillreceivethesystemlog.
 LocalLog:Choosetoenableordisablethelocallog.
 ClickontheApplybuttontosavethechanges.


4.5.8 Diagnostics
 ClickontheDiagnosticslinkundertheManagementmenu.Inthispage,usercanletunittoping
othernetworkequipment.Anduseralsocanmonitoraroutefromunittoyourtarget.