EnGenius EOC1650 - Administration; Snmp Settings

EnGenius EOC1650 Wireless Access Point / Client Bridge Version 2.0
50
6.5.1 Administration
 Click on the Administration link under the Management menu. This option allows you to 
create a user name and password for the device. By default, this device is configured
without a user name and password admin. For security reasons it is highly recommended
thatyoucreateanewuser
nameandpassword.



 Name:Specifyausernameintothefirstfield.
 Password:Specifyapasswordintothisfieldandthenre‐typethepasswordintotheConfirm
Passwordfield.
 ClickontheApplybuttontosavethechanges.


6.5.2 SNMPSettings
 Click on the SNMP Settings link under the Management menu. This option allows you to
assignthecontactdetails,location,andcommunitynameandtrapsettingsforSNMP.Thisis
anetworkingmanagementprotocolusedtomonitornetwork‐attacheddevices.SNMPallows
messages (called protocol data units) to be sent
 to various parts of a network. Upon
receiving these messages, SNMP‐compatible devices (called agents) return data stored in
theirManagementInformationBases..


 SNMPEnable/Disable:ChoosetoenableordisabletheSNMPfeature.
 Contact:Specifythecontactdetailsofthedevice.
 Location:Specifythelocationofthedevice.