EnGenius ECB300 Manual&Nbsp;

1
11N Long Range Multi-Function Client Bridge / Access Point
ECB300
11 N Long Range Multi-Function Client Bridge / Access Point
V1.0

EnGenius ECB300 Specifications

General

5 GHz	No
Modulation	16-QAM, 64-QAM, BPSK, CCK, DBPSK, DQPSK, QPSK
Frequency band	2.4 - 2.484 GHz
Operating modes	Access Point (AP), Client Bridge, Repeater, Router, WDS Access Point (AP), WDS Bridge
Channel bandwidth	40 MHz
Channels quantity	11 channels
Transmitting power	19 dBmW
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x, IEEE 802.3af
Virtual LAN features	Tagged VLAN
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	300 Mbit/s
Quality of Service (QoS) support	Yes
Antenna features	Detachable antenna
Antennas quantity	2
Antenna connector type	SMA
Antenna gain level (max)	5 dBi
Placement	Table
Certification	FCC, CE, IC
Product color	Black, Grey
WAN connection	Ethernet (RJ-45)
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	1
VPN support	IPsec, L2TP, PPTP
Security algorithms	128-bit WEP, 64-bit WEP, WPA-AES, WPA-PSK, WPA-TKIP, 802.1x RADIUS
Number of SSID supported	4
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
AC input voltage	90 - 240 V
AC input frequency	50 - 60 Hz
Power requirements	12V/1A DC
Cables included	LAN (RJ-45)
Flash memory	4 MB
Internal memory	32 MB

Weight and Dimensions

Depth	135 mm
Width	105 mm
Height	30 mm
Weight	280 g
Dimensions (WxDxH)	105 x 135 x 30 mm