EnGenius ECB300 - 3 Configuring Your Client Bridge; Default Settings

17
3 Configuring Your Client Bridge
This section will show you how to configure the device using the web-based configuration interface.
3.1 Default Settings
Please use your Ethernet port or wireless network adapter to connect the Client Bridge.
Default Settings
IP Address 192.168.1.1
Username / Password admin / admin
Operation Mode Client Bridge
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299