35
6.3 Wireless
The ECB1200 supports five operating modes: Access Point, Client Bridge, WDS AP, WDS Bridge, WDS Station.
To access operation mode, click Wireless section under Network in the sidebar. You will see Wireless setting customizable
options for both 2.4GHz and 5GHz. Under Wireless Setting you will see following items:
Enter a name for the device. The name you type appears in SNMP management. This name is
not the SSID and is not broadcast to other devices.
Select Region to conform to local regulations.
Send 802.11n client to the 5GHz band, where 802.11b/g clients cannot go and leave
802.11b/g clients in 2.4GHz to operate their slower rate. Band Steering works within the
Access Point by directing 5GHz-capable clients to the band.*
Use the radio button to select an operating mode.
To Next Page
Loading...
