EnGenius ECB1200 - Wireless

34
6.2 Spanning Tree Protocol
Spanning Tree Protocol setting under the Network sidebar, this function prevents network loops in your LAN network.
System Properties
Spanning Tree Status
Enable or disable the Spanning Tree function
Hello Time
Specify bridge Hello Time, in seconds. This value determines how often the device sends
handshake packets to communicate information about the topology throughput the entire
bridged local area network.
Max Age
Specify bridge Max Age, in seconds. If another bridge in the spanning tree does not send a
Hello packet for a long period of time, it is assumed to be in active.
Forward Delay
Specify bridge Forward Delay, in seconds. Forwarding Delay Time is the time spent in each
of the listening and learning status before the forwarding status is entered. This delay is
provided so that when a new bridge comes onto a busy network, it analyzes data traffic
before participating.
Priority
Specify the Priority number. A smaller number has greater priority.
Save
Click Save to confirm changes.