EnGenius EOR7550 - Universal Repeater (AP) Wireless Settings

33
¾ CTS Protection:CTS(Clearto Send) can be always enabled,auto,ordisabled.Byenabled
CTS, the Access Point and clients will wait for a ‘clear’ signal before transmitting. It is
recommendedtoselectauto.
¾ Tx Power:You may control the transmit output power of the device by selecting a value
fromthedrop‐downlist.Thisfeaturecanbehelpfulinrestrictingthecoverageareaofthe
wirelessnetwork.

4.2.5. WDSRepeater
4.2.5.1. Status

4.2.5.2. Basic
