36
¾ Preamble Type: Select a short or long preamble. For optimum performance it is
recommendedtoalsoconfiguretheclientdeviceasthesamepreambletype.
¾ CTS Protection:CTS(Clearto Send) can be always enabled,auto,ordisabled.Byenabled
CTS, the Access Point and clients will wait for a ‘clear’ signal before transmitting. It is
recommendedtoselectauto.
¾ Tx Power:You may control the transmit output power of the device by selecting a value
fromthedrop‐downlist.Thisfeaturecanbehelpfulinrestrictingthecoverageareaofthe
wirelessnetwork.
4.2.6. UniversalRepeater(AP)
4.2.6.1. Status
4.2.6.2. Basic
¾ Band:Configurethedeviceintodifferentwirelessmodes.
9 2.4GHz(802.11b/g)
9 5GHz(802.11a)
To Next Page
Loading...
