Need help?Do you have a question about the EnGenius EOR7550 and is the answer not in the manual?
Details wireless, networking, and security features of the EOR7550 device.
Explains the Access Point (AP) mode where the device acts as a wireless hub.
Describes the Client Bridge mode for associating with a nearby AP.
Explains the Client Router mode, functioning as both Client Bridge and Router.
Details the WDS Bridge mode for wireless communication between APs.
Describes the WDS Repeater mode for extending wireless coverage.
Explains Universal Repeater (AP) mode for signal regeneration.
Details Universal Repeater (STA) mode for operating as a client.
Provides step-by-step instructions for physically installing the device.
Guides on configuring the PC's TCP/IP settings to access the device.
Allows configuring the device into different modes for various purposes.
Configuration settings for the Access Point mode.
Configuration for the Client Bridge mode.
Configuration for the Client Router mode.
Configuration for the WDS Bridge mode.
Instructions for upgrading the device firmware.
Details the process of resetting the device to default settings.
To Next Page
General