15 /55
Quick Set Up Guide
1. Connect the mains cable to the mains socket after you have completed all the
connections correctly.
2. Switch on the power switch at the side of the TV or use a remote control.
3. The first time you turn the TV on, it will go straight into the Auto Installation Guide.
It will assist you to specify the Home Mode, Country, Language, Auto Power off, TV
Connection and Auto Search.
4. Press the [///→] buttons to navigate the menu and change the settings. Press
the [OK] button to confirm.
Select the mode you prefer.
Select the country where you will operate the TV
Select your desired language to be displayed on the menu.
Select the hours that you want the TV to be powered off.
(“OFF” means the viewing is timeless)
Select the method of TV connection. (Air, Cable or
Satellite)
Auto search the channels in different or all connections.
Note: If you want to reboot the Installation Guide, you can start it in the Setup Menu.
Network Connection
Wired Network
1) Ensure you have:
i. An ethernet cable long enough to reach your TV.
ii. A router or modem with an available Ethernet port.
iii. A high-speed internet connection.
iv. An Ethernet (LAN) port on the back of the TV.
2) Connect your ethernet cable to router and to the Ethernet Port on the back of the TV.
3) Press “INPUT” on remote control, use “/” to select “Android” and press “OK”.
4) Use mouse or remote control to select “Setting” and left click mouse or press “OK”.
Wireless Network
1) Ensure you have:
i. A router or modem broadcasting a high-speed wireless signal.
ii. A high-speed internet connection.
2) Press “INPUT” on remote control, use “/” to select “Android” and press “OK”.
3) Using remote control to select “Setting” and press “OK”.
To Next Page
Loading...