40 /55
2. In Timer menu, the user can increase, delete pre-engage programs.
In Timer Edit menu user could set and modify pre-engaged programs’ information.
In Timer menu: press YELLOW to get into Timer Edit menu to add a timer. Then set
timer’s information in Timer Edit menu. Flow of setting a timer’s information：
a) Type: Set program type to DTV or RADIO;
b) Mode: Way of triggering a timer(once/daily/weekly/monthly);
c) Recorder: “ON”: pre-engage for watching and recording(record),
“OFF”: pre-engage only for watching (reminder);
d) Set the date/time and Duration time (exact to minutes), and it must be reasonable
(behind current time);
e) Timer: when there is a conflict a warning message will pop up;
f) Press MENU to return to Timer menu and store the timer’s information.
3. When the timer recorder is a timeout, it jumps to the very channel and starts to record
the program automatically. (if a manual recording is under process, it will stop the manual
recording process and starts the timer recorder automatically); When there is left 10s
before recorder, a prompted window will pop up;
4. If there is not any storage media, the settings fail and a warning message “no USB
device” shows;
5. If target partition (default partition) is not set, it selects the first partition that the system
identified automatically.
To Next Page
Loading...