Enko AMF 3.1 - Menu Screen Structure

16/22
AMF 3.1 USER MANUAL
1
st
Row: Abbreviation for Apparent Power.
2
nd
Row: Generator U Phase Apparent Power
(kVA).
Please see Note 1.
1
st
Row: Abbreviation for RPM.
2
nd
Row: Generator RPM.
Please see Note 1.
1
st
Row: Oil Pressure Value.
2
nd
Row: Unit of Measurement “bar” or “psi”.
Please see Note 1.
1
st
Row: Coolant Temperature Value.
2
nd
Row: Unit of Measurement “Celcius”.
Please see Note 1.
1
st
Row: Abbreviation for Battery.
2
nd
Row: DC Battery Voltage.
Please see Note 1.
1
st
Row: Abbreviation for Charge.
2
nd
Row: DC Charge Voltage.
Please see Note 1.
1
st
Row: Abbreviation for Fuel Level.
2
nd
Row: Fuel Level (%).
While on this screen, pressing the up
button will navigate to the screen shown on
the top of this table (VR-N Voltage).
While on this screen, pressing the down
button will navigate to the screen shown
above.
Note 1: While on this screen, pressing the up button will navigate to the screen shown below.
While on this screen, pressing the down button will navigate to the screen shown above.
MENU SCREEN STRUCTURE
In order to view/edit paramters, the alarm log, the engine running hours and maintenance timers, the
menu must be entered. To enter the AMF 3.1 menu, press and hold the Menu Button for 3 seconds while in
measurement display mode.