Enlaps Tikee - 2 First Steps with Your Tikee; Tikee Installation and Framing Recommendations

First steps with your Tikee First steps with your Tikee
8
2
2
. Recommendations for installing and for
framing with your Tikee
For a period of a few hours shooting, your Tikee can be installed on its rubber sole on a sucient-
ly at and not tilted surface or on a camera tripod.
For a period of several days/months shooting, we recommend to use a rigid support which
ensure a same framing over time and secure the position of your Tikee. If you want you will nd a
set of accessories for your Tikee on our store at: https://enlaps.io/products-accessories/?lang=en.
To avoid the theft and/or acts of vandalism, place your Tikee in a discreet location, high up and
use an anti-theft system (your Tikee has a dedicated anti-theft insert).
Caution! Be sure to respect the safety instructions related to work at heights and every
recommandation of security and installation of the site where your place your Tikee.
Be sure that the proper installation of the xing support and of the Tikee are correct to prevent
any risk of falling. The Tikee should not be installed in balanced or tilted/movable surface that
could lead to its fall.
We cannot be held responsible for any damages that may result from improper use of our
solution.