To Next PageTo Next Page
Need help?Do you have a question about the enraf 862 MIT and is the answer not in the manual?
General| Model | 862 MIT |
|---|---|
| Category | Measuring Instruments |
| Manufacturer | Enraf |
| Power Supply | 24 VDC |
| Material | Stainless steel |
| Type | Level Transmitter |
| Application | Tank level measurement |
| Output Signal | HART |
| Operating Temperature | -40°C to +70 °C |
| Protection Class | IP66 |
Refer to the safety chapter for safety aspects and personal safety conventions.
Instrument conforms to EC Council Directive 89/336/EEC and Low Voltage Directive 73/23/EEC.
Manual is copyright of Enraf B.V. Disclaims responsibility for injury or damage from deviations.
Contact Enraf or representative for additional information.
Describes the 862 MIT as a solid-state electronic selector for interfacing an 864 MTT.
Explains how the 864 MTT's spot elements and optional board calculate average temperatures.
Details the 862 MIT's measurement cycle for auto-calibration.
Includes warnings and checks for connections, grounding, and physical dimensions.
Details how to set the temperature dimension (Celsius or Fahrenheit).
Defines tank and temperature probe parameters like reference resistance, element type, and number of elements.
Configures specific settings for the 877 FDI, including option board and temperature transmission.
Provides an overview of display formats for the 862 MIT and 864 MTT.
Summarizes available data items and error codes for operational status.
Lists recent temperature error codes encountered by MPU, HPU, or OPU boards.
Explains the four-byte status information for temperature data.
Details how to select and request calculation results using VP and VV items.
