Operation
Instruction manual 862 MIT Page 11
3 Operation
3.1 Display
For operation of the display and the information on it, refer to the instruction manual of the applicable level gauge
or 877 FDI. Below, only an overview is given which display formats gives information about the 862 MIT Multi
element Interface Thermo sensor converter / 864 MTT Multi Thermo sensor Thermometer.
Display format Displayed information
A Product level and average product temperature
C Average gas temperature and status
D Average product temperature and status
3.2 Data items and error codes
Below, a summary is given of the available data items and error codes. There is no operational command.
Item Description
AG Measured / Average gas temperature
AP calculated data Average product temperature
MQ Temperature status request
MU Test resistance (standard floating point format)
U0 - UF Calculated spot positions
V0 - VF Spot temperatures
VV Temperature pointer value (first set the temperature
value pointer item VP, then request for item VV)
EM Error codes Error MPU / HPU / OPU request
FM Fatal MPU errors
FH Fatal HPU / OPU errors
M0 Last fatal MPU error
H0 Last fatal HPU / OPU error
To Next Page
Loading...