11
Setup is now complete! Test all functions on remote.
Slide the left side of the mattress retainer bar into the bracket.
Pull the retainer bar to the opposite bracket and secure the right
side.
installation guide
For customer support, visit www.ergomotion.com or call: 1-844-534-3676
STEP 1
STEP 2
In the event that the base is stuck in an articulated po-
sition during a power outage- the Power Down Box will
return the base to a flat position.
(2) 9 Volt batteries are required to operate the power
down feature and are NOT included.
Locate the Power Down Box
under the base.
Press and hold the button until the base is flat.
For emergency use only.
The Power Down Box can only be used to bring the base to a flat
position. It will not bring the base to a flat position when the base
is connected to a working power source.
power down box
STEP 13
Plug the power cord into a power source.
A surge protector is recommended.
Locate the wireless
remote and insert 3
AAA batteries.
STEP 12
STEP 11
To Next Page
Loading...
