Enso PGT - Headboard Bracket Installation; Bracket Component Identification; Bracket Installation Steps

—8—
FOR Service or Questions Call 1-844-395-4587
Headboard Bracket Installation Guide
Headboard brackets are an optional accessory and are not included.
Metal Bracket - A (2pcs)
Metal Bracket - B (2pcs)
M8*40 Screw (8pcs)
Washer (8pcs)
Flange Nut (8pcs)
Spanner (1pc)
Allen Spanner (1pc)
STEP
The headboard bracket will have 3 long slots to accommodate any
frame type. Align the appropriate slots on the bracket with the holes
on the bed. Use M8*40 screw, washer and flange nut to secure the
bracket. Make sure the bolts are tight.
STEP
To put the Metal Bracket - B and Metal Bracket - A together, you
will need (2) M8*40 screw, (2) washer and (2) flange nuts. Slip the
bolts through the holes from Metal Bracket - B to Metal Bracket - A
with the head of screw facing outward. Use spanner and Allen
spanner to tighten the screws and nuts.
STEP
You may now connect your headboard to the attachment plates.
HEADBOARD BRACKET COMPONENTS
1
2
3
-10-