Entel HT649 - Radio Controls and Indicators Overview; Keypad and Button Functions; LED Indicator Status; Volume and Microphone

CONTROLS & INDICATORS
1. On/Off button. Press and hold to turn the radio on or off
2. MEM Button: Adds / removes the currently selected channel to / from the
scan list.
SCAN Button: Starts/Stops scanning the channels added to the scan list.
16 Button: Toggles between the currently selected channel and channel 16.
MON Button: Latches squelch open
3. Channel up / down buttons
4. Push To Talk (PTT) button. Press to speak and release to listen.
5. Non-programmable button
6. Short press toggles LCD and keypad backlight on/off. Long press toggles
keypad lock on/off
7. Non-programmable button
8. LED Indicator
Red steady - Transmitting
Red ashing slowly - Battery needs recharging
Green steady - Receiving
Amber pulsing – In standby mode
9. Volume Control
10. Microphone
1
2
8
9
5
4
6
10
T
a
l
k
H
e
r
e
3
7
The product shall only be put into service
after it has been professionally configured by
a specialist radio communications dealer for
the EU member state or geographical area it
is intended to be operated within.
Intended country of use
AT BE BG CH CY CZ DE DK EE
ES FI FR EL HR HU IE IS IT
LI LT LU LV MT NL NO PL PT
RO SE SI SK TR UK(NI)