Entrust Sigma DS4-ES1 Installation And Administrator's Guide

Sigma DS4 and DS4-ES1 Installation and Administrator’s Guide 7
Secure Printing Requirements
Secure printing consists of encrypting print commands and card data and transmitting the
information securely from the PC to the printer. To use encryption, your printer must support
secure printing. Printers that support secure printing are shipped with both non-secure (DPCL
and DPCL2) and secure (DPCL2Secure) communication protocols enabled. You can enable or
disable communication protocols using the Printer Dashboard. Refer to the Printer Dashboard
Help for information about how to specify printer security settings.
The printer uses TLS for encryption. The default setting restricts connections to the printer to TLS
1.2 to provide maximum security. However, you can change the minimum TLS version, if
necessary. To change the TLS encryption version requires Service access. Contact your system
administrator or your service provider.
If your card production site requires secure printing, use the following:
 An Entrust Sigma DS4 card printer with secure printing (DPCL2Secure) enabled and both
DPCL and DPCL2 disabled.
 The TLS version set to TLS1_2. This restricts secure communication to TLS 1.2-compatible
encryption.
 A PC that meets the PC requirements listed in “PC Requirements” on page 1.
 An Ethernet connection that meets the requirements listed in “Ethernet Requirements” on
page 2.
 A current browser.
 The current version of printer firmware. New firmware releases add patches for known
security vulnerabilities.

Entrust Sigma DS4-ES1 Specifications

General

Brand	Entrust
Model	Sigma DS4-ES1
Category	Printer
Language	English