CV Driver MK2 Manual
50394
www.enttec.com
5
ID: 82325
2- Detach the metal lid by removing the 10 Philips type
screws. Please note that there is a wire running from the
base to the lid which need to be watched during the pro-
cedure:
3- Locate and change the desired fuse in the main con-
troller board using one of the diagrams below:
4- Place the lid back and the unit will be ready to be re-
powered.
Dimensions
The ALEPH CV DRIVER is designed to fit the modular rack ac-
cessory (sold separately) which allows stacking up to 8
units.
Due to continuous improvements and innovations of all
ENTTEC products, specifications and features are subject to
change without notice.
Revision Log
Stackable Modular Rack (Accessory)
The modular rack (sold separately) allows up to 8 ALEPH CV
DRIVER units to be stacked up using only 3 standard rack
units (3RU). Also has an in-built fan at the rear side.
To Next Page
Loading...
