Need help?Do you have a question about the Enttec DMX USB PRO Mk2 and is the answer not in the manual?
General| Type | DMX Interface |
|---|---|
| Connectivity | USB |
| DMX Channels | 512 |
| Power Supply | USB powered |
| Operating System Compatibility | Windows, macOS, Linux |
| Protocols | DMX512 |
| USB Connector | USB Type-B |
| DMX Connector | 5-pin XLR |
| DMX Output | Yes |
| DMX Input | Yes |
| Baud Rate | 250 Kbps |
Detailed list of the PRO Mk2's capabilities, including DMX ports and RDM support.
Instructions and supported operating systems for installing the PRO Mk2 drivers.
Steps for connecting the PRO Mk2 to a computer using the USB cable.
Guide to selecting and configuring the COM port for the PRO Mk2 in Windows.
Procedures for testing the PRO Mk2 and performing firmware updates using the manager.
To Next Page
