ENTTEC DMX-PRO Manager
ENTTEC provides a free cross-platform app to configure, test and update the PRO Mk2. It
also allows the user to record a DMX show into the memory and setup the standalone mode
on the PRO Mk2. The App is available for Windows on the CD or you can download the
latest version for Windows or Mac from the ENTTEC website (www.enttec.com/promk2).
Use this App to test your PRO Mk2, change default parameters (Refresh rates,
Break Time), test DMX Send and Receive on both ports, and setup Standalone
show playback.
This App is merely a troubleshooting tool and not Lighting Control software
The App runs inside a browser, and it opens up the page by default, however you
can also use this address in your browser (http://localhost:55555/ )
Test and Update PRO Mk2
From the DMX-PRO Manager Home page, you can click the button (Find USB PRO) to
search for USB-PRO's connected to your computer. Once it finds it, please select it from the
selection box to talk to it.
Once selected, you will see all the device information on the Home Page , and you can
update the firmware on the PRO Mk2 using the Firmware Update box. The following steps
will guide you on how to update the firmware, use this procedure to reset the PRO Mk2 if it
ever gets stuck or stops responding:
21
To Next Page
Loading...
