Typographic conventions used in this manual
PRO Mk2: Short name used to mention DMX USB PRO Mk2 throughout this manual
Memory: inbuilt memory of PRO Mk2 that is used to store the DMX show and supports the
standalone mode
Data boxes: The names of the boxes where data is entered appear in a different typeface.
Eg. The name of the "Delay" entry box is printed as Delay.
Getting to know your PRO Mk2
Thank you for purchasing the PRO Mk2. At ENTTEC we are proud of our products and we
hope you will enjoy using them as much as we enjoy designing and building them.
The PRO Mk2 is a USB hardware interface which sends DMX when connected to a
computer, by plugging it into a Universal Serial Bus (USB) and various types of lighting
equipment, via the industry standard DMX512 protocol. It provides Two, fully independent,
DMX ports each with full RDM capability.
The accompanying Driver software allows the computer to control and configure the PRO
Mk2.
Features
The PRO Mk2 provides:
9
To Next Page
Loading...
