Enttec ODE - User Manual

TNF Concept - 62 rue de Paris - 77240 Champs sur Marne - France
www.tnfconcept.com contact@tnfconcept.com
The Enec ODE is a Art-Net node which can be connected to a WiFi and compable network
with the Art-Net mode of the applicaon Run The Show DMX.
Download and install on your computer the Node Managment Ulity (NMU) by following
the link:
hp://www.enec.com/?main_menu=Products&pn=79001
Connect the Enec ODE to a Ethernet
PORT of the computer on which the
NMU soware was installed.
Deacvate the WIFI of the computer
to which the ODE is connected
(note previously the parameters of
connecon: IP address and mask of
network). For example, it will be: IP
192.168.1.1 and mask 255.255.255.0.
Congure Enec ODE on OsX
Open the network preferences.
Configure Enttec ODE

Summary

Enttec ODE Initial Setup and Software Installation

Download and Install Node Management Utility

Download and install the Node Management Utility (NMU) software from the provided link.

Prepare Computer for ODE Connection

Connect the ODE to the computer's Ethernet port and deactivate the computer's Wi-Fi.

Configure Network Settings for Enttec ODE

Manually Configure Computers Ethernet IP

Configure the computer's Ethernet port with a static IP address and subnet mask.

Launch NMU and Select Network Interface

Start the NMU software and select the appropriate network interface for discovery.

Configure ODE IP Address and Protocol

Set the ODE's IP address, device name, and protocol (Art-Net) via the NMU interface.

Finalize Connection and Verify ODE

Restart ODE and Reactivate Computer WiFi

Restart the ODE with the new IP address and reactivate the computer's Wi-Fi connection.

Discover ODE with iPad and DMX Application

Connect an iPad to the Wi-Fi network and discover the ODE using the Run The Show DMX app.

Enttec ODE Specifications

General

Protocol	Art-Net, sACN
Ethernet	10/100 Mbps
Ethernet Ports	1
Power Input	USB or PoE
Connectors	RJ45
Power Supply	USB or PoE
Product Name	ODE (Open DMX Ethernet)