USER GUIDE - v1.0
ID: 5928937
1 |
OCTO – 71521
Visit the ENTTEC website for
the latest version
OCTO – User Guide
8 universe eDMX to LED pixel controller with network chaining in a compact 4-module DIN-rail form factor
ENTTEC’s OCTO is a robust and reliable
installation grade LED controller
engineered to take any architectural,
commercial or entertainment project to
the next level.
With 8 universes of eDMX to pixel
protocol conversion and network
chaining between devices, the OCTO
allows for fast deployment of LED strips
and pixel dot systems compatible with a
wide range of devices.
The OCTO is packed with installer-
friendly features such as an identify
button to check correct wiring,
temperature monitoring, a wide input
voltage range and intuitive configuration
and management through its localhost
web interface. All contained within a 4
DIN unit form factor.
The inbuilt Fx engine allows users to edit
and create presets, using the OCTO’s web
interface that can be configured to run
standalone at power up.
FEATURES
Two * 4-universe pixel outputs with Data
and Clock support.
Support for up to 8 universes of Art-Net,
sACN, KiNet and ESP.
Easily extendable network - daisy chain
ethernet connection between devices.
DHCP or Static IP address support.
Multiple pixel protocols supported, see:
www.enttec.com/support/supported-
led-pixel-protocols .
Surface or TS35 DIN rail mounting option.
Intuitive device configuration and updates
through the inbuilt web interface.
Test/Reset button allows installers to
quickly check wiring is correct without
requiring a network connection.
Simple Fx generator mode to create and
execute preset effects on the fly,
configurable to play from power up.
Grouping functionality to reduce input
channel count.
To Next Page
Need help?
General
