Enttec OCTO User Manual


USER GUIDE - v1.0
ID: 5928937
5 |
OCTO – 71521
Visit the ENTTEC website for
the latest version
Installation
 Installation of this product must be performed by qualified personnel. If ever unsure always consult
a professional.
 Always work with a plan of the installation that respects all system limitations as defined within this
guide and product datasheet.
 Keep the OCTO and its accessories in its protective packaging until final installation.
 Note the serial number of each OCTO and add it to your layout plan for future reference when
servicing.
 All network cabling should be terminated with an RJ45 connector in accordance with the T-568B
standard.
Protection from injury during installation
 Always use suitable personal protective equipment when installing ENTTEC products.
 Once installation is completed, check that all hardware and components are securely in place and
fastened to supporting structures.
Installation safety guidelines
 The OCTO is convection cooled, ensure it receives sufficient airflow so heat can be dissipated.
 Do not cover the OCTO with insulating material of any kind.
 Do not operate the OCTO if the ambient temperature exceeds 50° C (122° F).
 Do not cover or enclose the OCTO without a suitable and proven method of dissipating heat.
 Do not install the OCTO in damp or wet environments.
 Do not modify the OCTO hardware in any way.
 Do not install the OCTO if you see any signs of damage.
 Do not handle the OCTO in an energized state.
 Do not crush or clamp the OCTO during installation.
 Do not sign off a system without ensuring all cabling to the OCTO and accessories has been
appropriately restrained, secured and is not under tension from the way it has been installed.

Enttec OCTO Specifications

General

Brand	Enttec
Model	OCTO
Category	Controller
Language	English