Envertech EVT400-B User Manual

11
Fields marked with an asterisk (*) are required.
For Device S/N, you can find S/N labeling on EVT400 or outer
packaging. Enter the last 8 digits of it or scan the corresponding
barcode.
2) MI Binding
Option 1. Use EnverView app to bind MI
Step 1. Log in your account on your mobile phone. Then go to
“Settings”.
Step 2. Under “Device Management”, click “+” and enter the SN of
EVT400.
Step 3. Click “Confirm” to finish adding the MI.
Note: Please ensure that both EVT400 and your phone are in the
same router network.
Option 2. Use EnverView app to bind MI (Local mode)
Note: Please ensure that both EVT400 and your phone are in same router
network.
Step 1. Launch EnverView app, and enter Local Mode. Connect your EVT400.
Step 2. On EVB Overview page, enter Settings. Click Add MI you could choose
enter MI SN manually or click the grid icon to scan the MI SN automatically.
Option 3. Use EnverPortal to bind MI
a. Login www.envertecportal.com with the newly-registered account, go
to Settings--Management.
b. Click Add, then enter the SN of EnverBridge, click OK to finfish adding
monitor.

Envertech EVT400-B Specifications

General

Brand	Envertech
Model	EVT400-B
Category	Inverter
Language	English