4. Select the current wireless network, and press "OK".
5. Fill in the corresponding Wi-Fi password and press "Save".
6. After the above operation, click "Restart". It will restart after 5 seconds.
7. The webpage will prompt “Rebooting Successful!”.
Note: Don't forget the password, otherwise it cannot be reset!
Step 10. Monitoring through EVT400
1) Register a new account by app or website.
Option 1. Visit www.envertecportal.com. Click Sign Up. Fill in the
account information to finish registration.
Option 2. Use the app “EnverView” to register
To Next Page
Loading...
