Enviro Bistro 4500 C-10124 - Assembly Instructions: Engine Components

6
2 BBQ wheels
2 plated caster
assemblies
2 stainless steel
axle mounts
The components shown in Figure 6 should be
found in the smaller box.
ENGINE COMPONENTS:
● Pre-assembled engine ● (3) Flame diffusers ● Warming Rack
● Metal Foil Container ● Utensil rack ● Owner’s manual
● Grill removal tool ● Warranty card ● Hose with pressure regulator
● (8) ” x ” stainless steel bolts ● (2) ” stainless steel nuts ● (8) ” stainless steel lock washers
Grill removal
tool
Warranty
card
Bag of hardware
Utensil rack
Hose with pressure
regulator
The components shown in Figure 8 should
be found in the manual bag found inside the
engine.
When the top of the shipping box has been removed and the lid
has been opened, it will look similar to Figure 7.
A metal foil container is taped to the warming rack and the
warming rack is taped to the windshield. All tape must be removed
from inside the engine before your Bistro 4500 is started for the
rst time. The three ame diffusers are stacked and the rest of
the components will be found in the manual bag.
Figure 6
Figure 7
Figure 8