+1.800.343.5319 or +1.843.881.6560 envexp.com Environmental Express • 3
SimpleDist® Micro Heating Block: Operation & Instruction Manual General Information
HotBlock® Declaration of Conformity
The manufacturer,
Environmental Express
2345A Charleston Regional Parkway
Charleston, SC 29492
declares that the following products,
HotBlock® Item #
SC196, SC154, SC150, SC151, SC100, and C6002,
are in conformity with:
Standard for Safety Electrical Equipment for Measurement, Control, and Laboratory Use;
Part 1 General Requirements, UL 61010-1, CAN/CSA-C22.2 No. 61010-1, 2nd Edition, Issued 12
July, 2004 with revisions through and including 28 October, 2008; Equipment for Measurement,
Control, and Laboratory Use Part 2-010: Particular Requirements for Laboratory Equipment
for the Heating of Materials, IEY 61010-2-010, 2nd Edition, Issued 1 June, 2003, Safety
Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use -
Part 2-010:Particular Requirements for Laboratory Equipment for the Heating of Materials,
CSA C22.2.61010.2.01
Note: The SimpleDist® Micro Heating Block is manufactured using the HotBlock® technology
and circuitry.
Information and Markings
Environmental Express SimpleDist® Micro Heating Blocks provide an efcient method of
digesting, distilling, and storing water, wastewater, soil and sludge samples for analysis. These
innovative digestion systems allow samples to be digested in a corrosion-free environment. In
addition, samples are handled in a small area with minimal radiant heat loss. Users should
be aware of potential dangers from heating certain types of compounds. Such hazards may
include explosion or the release of toxic or ammable gases.
Each SimpleDist® Micro Heating Block displays certain markings and symbols. All personnel
working with the heating block should have an understanding of the following symbols and
denitions:
• V = voltage
• ~ = alternating current
• Hz = frequency
• A = amperes
This symbol means Caution hot
surface. All surfaces of the SimpleDist®
Micro Heating Block may be too hot to
safely touch with bare hands.
This symbol means Read and become
familiar with instructions before
operation of equipment.