Atmos
01423 810 810
SHOULD YOU ENCOUNTER ANY PROBLEMS
INSTALLING THIS UNIT, CALL US ON:
15
SETTINGS - Standard Units
Top button
-Press to show the current air flow rate setting.
-The corresponding LED will illuminate on the keypad.
-Further presses scroll through the air flow rate settings 1, 2, 3 and
4 on a loop.
-Adjust this according to the size, type and occupancy of the property.
Bottom button
-Press to show the total running time.
-The numeric display will illuminate to show the total amount of time
the unit has been running. e.g. ‘1234’ (hours)
Wi-Fi App myenvirovent
App enabled units can be controlled using the myenvirovent app on
Apple and Android devices. The SSID and password information for the
unit is printed on the back page of this installation guide and also on a
label attached to the unit.
A separate instruction guide for the myenvirovent app is included in the
box. Once the unit has been installed, refer to this guide for connection
and further settings.
To Next Page
Loading...
