Atmos
01423 810 810
SHOULD YOU ENCOUNTER ANY PROBLEMS
INSTALLING THIS UNIT, CALL US ON:
9
2b
Installation
1. Place a dust sheet below the required ceiling diffuser position and
check the ceiling below and loft space above are unobstructed.
2. a) For ATMOS mark a 222mm diffuser hole using the template.
2. b) For ATMOS DUAL mark two 105mm diffuser holes
(see page 8 for positioning information).
3. Wearing a dust mask and eye protection, cut out the hole/s.
2a
3
1
To Next Page
Loading...
