HOW TO ADJUST A SETTING
1. Press the MENU-button to activate the OSD window (Figure 5).
2. Press < or > to navigate through the functions. Once the desired function
is highlighted, press the MENU-button to activate it. If the function selected
has a sub-menu, press < or > again to navigate through the sub-menu
functions. Once the desired function is highlighted, press MENU-button to
activate it.
3. Press < or > to change the settings of the selected function.
4. To exit and save, select the exit function. If you want to adjust any other
function, repeat steps 2-3.
Figure 5 The OSD Message
To Next Page
Loading...
