Envision G2219 - Monitor Operation; General Operation and Controls

8
OPERATING INSTRUCTIONS
GENERAL INSTRUCTIONS
Press the power button to turn the monitor on or off. The other control buttons
are located on the side of the monitor (See Figure 4). By changing these settings,
the picture can be adjusted to your personal preferences.
• The power cord should be connected.
• Connect the video cable from the monitor to the video card.
• Press the power button to turn on the monitor. The power indicator will light
up.
Figure 4 External Control Button
EXTERNAL CONTROLS
1.
SOURCE
2.
Auto Adjust button / Exit
3.
-/Eco mode
4.
+/DCR
5.
MENU /ENTER
6.
Power button