INSTALLATION INSTRUCTIONS
SWIVEL BASE
Install Remove
Figure 1 Installing and Removing the Swivel Base
POWER CORD
Power Source:
1. Make sure that the power cord is the correct type required in your area.
2. This LCD monitor has an External universal power supply that allows
operation in either 100/120V AC or 220/240V AC voltage area (No user
adjustment is required.)
3. Connect the AC-power cord into your LCD monitor’s power input socket, The
AC-power cord may be connected to either a wall power outlet or the power
outlet socket on your PC, depending on the type of power cord supplied with
your LCD monitor.
To Next Page
Loading...
