ENVO D35 - 4.6. Torque Chart for Assembly; 4.7. Assembly Checklist Before First Ride

ENVO D35 | ST EBIKE MANUAL | VERSION 1.0 27
Fasteners must be tightened correctly. Fasteners are not secured if the torque is too little,
and the fasteners can deform, stretch, or break if the torque is too much. Incorrect torque
can lead to component failure resulting in serious injury or even death.
4.7. ASSEMBLY CHECKLIST
It is important to complete the following checklist before your rst ride to ensure that bike is
assembled correctly:
 Handlebar aligned correctly
 Pedals are correctly installed
 The seat post is installed and its height adjusted
 Front-wheel installed and aligning with handlebar correctly
 The front and Rear brakes working
 Tires are inated and up to correct pressure
 Lights and Reectors connected
4.6. TORQUE CHART
COMPONENT TORQUE
Front wheel Axle Quick Release closed cam system
Rear Hub cone locking nut
Pedal 30 Nm
Kickstand 15 Nm
Clamps for fender 15 Nm
Stem bolt 12 Nm
Handlebar bolts 5 Nm
Crank bolt